論文・報告

No.タイトル・執筆者
2
プレキャスト柱梁接合部におけるシース管内通し柱主筋の付着性状確認実験
古澤 護 / 松永 健太郎 / 新上 浩 / 田野 健治 / 平野 秀和 / 甲田 輝久

柱梁接合部プレキャスト部材におけるシース管を含めた鉄筋の配筋納まりの改善を目的として、従来よりも内径を5mm縮小した内径55mmの柱シース管にD41およびD38鉄筋を後挿入した鉄筋引抜き実験を実施して付着性状を確認した。実験変数はコンクリート圧縮強度および鉄筋径とした。その結果、内径55mmシース管にD41およびD38 の鉄筋を後挿入してグラウトを充填した場合においても、鉄筋貫通孔を有さない一体打ちとしたものと比較して最大付着応力度については同等以上の値を示すことを確認した。

キーワード : プレキャスト、付着性状、シース管、柱主筋、グラウト

Pull-out Tests to Confirm the Bond Characteristics of Column Longitudinal Bars Passing Through a Sheath in Precast RC Beam-Column Joints
MAMORU FURUSAWA / KENTARO MATSUNAGA / HIROSHI SHINJO / KENJI TANO / HIDEKAZU HIRANO / TERUHISA KODA

This paper discusses the results of pull-out tests conducted to improve the arrangement of the sheath and reinforcement in precast RC beam-column joints. The bond characteristics of column longitudinal bars passing through a sheath with an inner diameter of 55mm, which is 5mm less than the current construction standards, were confirmed. It was verified that the bond strength achieved by installing D41 and D38 longitudinal bars through the sheath and grouting was equal to or greater than that of traditional cast in place reinforced concrete beam-column joints.

Key Words : Precast, Bond characteristics, Sheath, Column longitudinal bars, Grout

第22号2024年の一覧へ戻る