論文・報告

No.タイトル・執筆者
6
超高層免震住宅における積層ゴムの引張力低減技術の拡張
三木 彩加 / 長谷川 毅 / 徳武 茂隆 / 廣邊 琢也 / 高橋 絵里 / 瀬藤 慎一

地震時に積層ゴムに作用する引張力を緩和し、上部構造を浮上がらせることのできる引張対応積層ゴムの適用範囲の拡大について検討した。浮上がり機構は、積層ゴム下部フランジプレートとベースプレートとの垂直方向の相対移動を許容し、水平方向の相対移動を拘束するせん断対応ボルトと、浮上がり時の引張力を緩和する弾塑性部材である引張対応ゴムワッシャ、および浮上がり時の引張力を免震基礎に伝達する引張対応ボルトで構成される。引張対応ボルトのサイズをM30からM36,M39へと拡大した際の引張対応ゴムワッシャの性能を確認することを目的とし、性能試験を実施した。その結果、M36,M39においてもM30と同様の性能を有していることを確認した。試験結果とともに、設計における引張対応積層ゴムのモデル化について報告する。

キーワード : 超高層建物、免震構造、引張力対策、浮上がり機構、設計モデル

Extension of Tensile Force Reduction Technology for Laminated Rubber Bearings in High-Rise Seismic-Isolated Buildings
AYAKA MIKI / TAKESHI HASEGAWA / SHIGETAKA TOKUTAKE / TAKUYA HIROBE / ERI TAKAHASHI / SHINICHI SETOU

We investigated the applicability of tensile-resistant laminated rubber bearings capable of mitigating tensile forces acting on the bearings during seismic events, thereby enabling controlled uplift of the superstructure. The proposed uplift mechanism includes three key components. Shear-resistant bolts restrain horizontal relative displacement between the bottom flange plate of the laminated rubber bearing and the base plate. Tensile-resistant rubber washers alleviate tensile forces during uplift through elasto-plastic deformation. Tensile-resistant bolts transfer the remaining tensile forces to the seismic isolation foundation.

This study aims to evaluate the performance of the tensile-resistant rubber washers when the diameter of the tensile-resistant bolts is increased from M30 to M36 and M39. As a result, it was confirmed that M36 and M39 have the same performance as M30. Additionally, a modeling approach for tensile-resistant laminated rubber bearings is presented to support structural design applications.

Keywords : High-rise building,Seismically isolated structure, Tensile force mitigation, Uplift mechanism, Design model

第23号2025年の一覧へ戻る